3412Fantom 2.0.
3412 Fantom 2.0 End Mill
Our Fantom 2.0 high-performance end mill increases productivity and lowers costs per part in hardened steels, super alloys, stainless steels, and steels.
The 3412 Fantom 2.0 is a 5-flute, high-performance end mill designed for hardened steels above 48 HRC, steels, stainless steels, titanium, and nickel-based super alloys, including Inconel. Its variable index and eccentric relief provide stability and cutting-edge strength, supporting heavier chip loads and increased productivity while helping reduce cost per part in difficult-to-machine materials.
Filter by diameter, length, coating and more — then check live pricing.
Explore this seriesResources
Access the information you need to put the Fantom 2.0 to work.
Best Applications
How the Fantom 2.0 maps across ISO-513 material groups and machining operations.
Choosing Between the Fantom 2.0 & Fantom
The 3412 Fantom 2.0 is designed for stable, high-performance milling in hardened steels above 48 HRC, steels, stainless steels, titanium, and super alloys. Its FC20 coating and enhanced cutting-edge strength support longer tool life, greater productivity, and a lower cost per part. For softer, non-ferrous materials such as brass and copper—or applications where heavier chip loads and part finish are the priority—consider the 3410 Fantom. Its FC18 coating provides wear resistance across a broader material range.
| Feature | 3412 Fantom 2.0 | 3410 Fantom |
|---|---|---|
| Best for | Hardened steels (>48 RC), stainless steels, super alloys, steels, titanium | Steels, stainless steels, super alloys, titanium, brass & copper |
| Coating | FC20 — high hardness, elasticity, oxidation resistance, low friction | FC18 — wear resistance |
| Key benefit | Enhanced edge strength, increased productivity, lower cost per part | Heavier chip loads, superior part finishes |
Frequently Asked Questions
It's designed for Hardened Steels > 48 RC, Stainless Steels, Steels, Super Alloys (Nickel based, Inconel), and Titanium.
It's stocked with FC20 coating. Our FC20 coating combines high hardness, elasticity, oxidation resistance, and low friction for dependable performance. Excellent for stainless steels and nickel-based high-temperature alloys.
It's available in Corner Radius, Square.
The 3412 Fantom 2.0 is a 5-flute tool.
The 3412 Fantom 2.0 uses a variable helix angle.
The 3412 Fantom 2.0 holds a shank tolerance of h6 and a cutter tolerance of +.0000"/-.002" | +0.00mm/-0.05mm.
Connect With Sales
Questions about the Fantom 2.0? Our engineering team will help you dial in the right tool.
