EDP 37800, 3412 Fantom 2.0 8 mm Corner Radius End Mill
- Coating
- FC20
- Number of Flutes
- 5
- End Type
- Corner Radius
- Length
- Long Reach
- Cutting Diameter
- 0.3150
- Flute Length
- 0.5906
- Shank Diameter
- 0.3149
- Overall Length
- 3.9370
- Neck Diameter
- 0.3051
- Reach
- 2.3622
- Radius
- 0.0197
- Cutting Type
- Center
Combines high hardness, elasticity, oxidation resistance, and low friction for dependable performance. Excellent for stainless steels and nickel-based high-temperature alloys.
Don't see the coating you need? We can coat or alter this tool — get instant pricing & lead time.
The 3412 Fantom 2.0 is a 5-flute, high-performance end mill designed for hardened steels above 48 HRC, steels, stainless steels, titanium, and nickel-based super alloys, including Inconel. Its variable index and eccentric relief provide stability and cutting-edge strength, supporting heavier chip loads and increased productivity while helping reduce cost per part in difficult-to-machine materials.
Size chart · 3412 Fantom 2.0 Corner Radius · Long Reach
| Corner radius | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Diameter | Flute Length | Shank Diameter | Overall Length | Neck Diameter | Reach | 0.25 mm | 0.5 mm | 0.75 mm | 1 mm |
| 3 mm | 4 mm | 3 mm | 50 mm | 2.87 mm | 10 mm | ||||
| 3 mm | 4 mm | 3 mm | 50 mm | 2.87 mm | 12 mm | ||||
| 8 mm | 15 mm | 8 mm | 100 mm | 7.75 mm | 60 mm | 37800 | |||
| 8 mm | 27 mm | 8 mm | 76 mm | 7.75 mm | 35 mm | ||||
| 10 mm | 12 mm | 10 mm | 150 mm | 9.6 mm | 79 mm | ||||
| 10 mm | 12 mm | 10 mm | 150 mm | 9.6 mm | 105 mm | ||||
| 12 mm | 16 mm | 12 mm | 150 mm | 11.6 mm | 86 mm | ||||
| 12 mm | 20 mm | 12 mm | 100 mm | 11.6 mm | 54 mm | ||||
| 16 mm | 20 mm | 16 mm | 150 mm | 15.34 mm | 86 mm | ||||
8 mm 3412 Fantom 2.0, other ends & lengths
| EDP | End | Length | Flute length | Overall length | Radius | Open |
|---|---|---|---|---|---|---|
| 37559 | Corner Radius | Standard | 12 mm | 50 mm | 0.3 mm | |
| 37561 | Corner Radius | Stub | 12 mm | 50 mm | 0.5 mm | |
| 37565 | Corner Radius | Standard | 12 mm | 50 mm | 2 mm | |
| 37569 | Corner Radius | Standard | 22 mm | 76 mm | 0.3 mm | |
| 37567 | Corner Radius | Standard | 22 mm | 64 mm | 0.5 mm | |
| 37572 | Corner Radius | Standard | 22 mm | 76 mm | 0.75 mm | |
| 37106 | Corner Radius | Standard | 22 mm | 64 mm | 1 mm | |
| 37575 | Corner Radius | Standard | 22 mm | 76 mm | 2 mm | |
| 37566 | Square | Standard | 22 mm | 64 mm |
8 mm in other End Mills
| EDP | Series | Length | Flute length | Overall length | Radius | Flutes | Coating | Open |
|---|---|---|---|---|---|---|---|---|
| 563.080.75 | 563 Inovatools Radius HSC Diamond-Line - Short | Standard | 15 mm | 63 mm | 0.5 mm | 4 | ||
| 564.080.75 | 564 Inovatools Radius HSC Diamond-Line - Long | Standard | 15 mm | 100 mm | 0.5 mm | 4 | ||
| 93917 | 3000 Intimidator | Stub | 16 mm | 50 mm | 0.5 mm | 4 | ||
| 35118 | 3500 Fury | Stub | 12 mm | 50 mm | 0.25 mm | 4 | ||
| 35601 | 3505 Fury Vicor | Stub | 12 mm | 50 mm | 0.5 mm | 4 | ||
| 91364 | 3200 4-Flute General Purpose | Standard | 12 mm | 50 mm | 1 mm | 4 |
About EDP 37800
Fullerton EDP 37800 is the 3412 Fantom 2.0 8 mm Corner Radius End Mill: length Long Reach, flute length 15 mm, shank diameter 8 mm, overall length 100 mm, radius 0.5 mm, neck diameter 7.75 mm, reach 60 mm, coating FULCOAT 20, cutting type Center, 5 flutes. Made in the USA by Fullerton Tool.
EDP 37800 questions
- What are the dimensions of Fullerton EDP 37800?
- EDP 37800 has a cutting diameter of 8 mm (0.3150"), flute length of 15 mm (0.5906"), shank diameter of 8 mm (0.3149"), overall length of 100 mm (3.9370"), radius of 0.5 mm (0.0197"), neck diameter of 7.75 mm (0.3051") and reach of 60 mm (2.3622").
- What coating is on EDP 37800?
- EDP 37800 is coated with FULCOAT 20.
- What materials is EDP 37800 rated for?
- The 3412 Fantom 2.0 is rated for Hardened Steels > 48 RC, Stainless Steels, Steels and Super Alloys (Nickel based, Inconel).
- Where can I check stock and price for EDP 37800?
- Live stock by warehouse, lead time and your account's price for EDP 37800 are in Fullerton's tool search at fullertontool.com/search. Signed-in customers can order from there.
- What materials is the 3412 Fantom 2.0 designed for?
- It's designed for Hardened Steels > 48 RC, Stainless Steels, Steels, Super Alloys (Nickel based, Inconel), and Titanium.
- What coating does the 3412 Fantom 2.0 come with?
- It's stocked with FC20 coating. Our FC20 coating combines high hardness, elasticity, oxidation resistance, and low friction for dependable performance. Excellent for stainless steels and nickel-based high-temperature alloys.
- What end styles are available for the 3412 Fantom 2.0?
- It's available in Corner Radius, Square.
- How many flutes does the 3412 Fantom 2.0 have?
- The 3412 Fantom 2.0 is a 5-flute tool.
- What's the helix angle on the 3412 Fantom 2.0?
- The 3412 Fantom 2.0 uses a variable helix angle.
- What tolerances does the 3412 Fantom 2.0 hold?
- The 3412 Fantom 2.0 holds a shank tolerance of h6 and a cutter tolerance of +.0000"/-.002" | +0.00mm/-0.05mm.
