EDP 27123, 3833 AlumaMill G3 5/8" Corner Radius End Mill
- Number of Flutes
- 3
- End Type
- Corner Radius
- Length
- Standard
- Cutting Diameter
- 0.6250
- Flute Length
- 1.2500
- Shank Diameter
- 0.6250
- Overall Length
- 3.5000
- Radius
- 0.0600
- Cutting Type
- Center
Delivers the natural performance of premium carbide without a coating. An excellent choice for a wide range of machining applications where coating benefits are not required, offering reliable performance and sharp cutting edges.
Don't see the coating you need? We can coat or alter this tool — get instant pricing & lead time.
The 3833 AlumaMill G3 is a 3-flute, high-performance end mill designed for high- and low-silicon aluminum, composites, plastics, and wood. Built for aggressive roughing and finishing in aluminum and other non-ferrous materials, its optimized flute shape and relief form support consistent wall finishes, while its unique wiper geometry helps produce smooth floor finishes.
Size chart · 3833 AlumaMill G3 Corner Radius · Standard
| Corner radius | ||||||||
|---|---|---|---|---|---|---|---|---|
| Diameter | Flute Length | Shank Diameter | Overall Length | 0.0150" | 0.0300" | 0.0600" | 0.0900" | 0.1200" |
| 1/8" | 1/4" | 1/8" | 1-1/2" | |||||
| 1/8" | 1/2" | 1/8" | 2" | |||||
| 1/8" | 3/4" | 1/8" | 2" | |||||
| 3/16" | 5/16" | 3/16" | 2" | |||||
| 3/16" | 5/8" | 3/16" | 2" | |||||
| 1/4" | 1/2" | 1/4" | 2" | |||||
| 1/4" | 3/4" | 1/4" | 2-1/2" | |||||
| 1/4" | 1" | 1/4" | 2-1/2" | |||||
| 1/4" | 1-1/4" | 1/4" | 3" | |||||
| 5/16" | 1-1/4" | 5/16" | 3" | |||||
| 3/8" | 1/2" | 3/8" | 2-1/2" | |||||
| 3/8" | 1" | 3/8" | 2-1/2" | |||||
| 3/8" | 1" | 3/8" | 3" | |||||
| 1/2" | 5/8" | 1/2" | 3" | |||||
| 1/2" | 3/4" | 1/2" | 3" | |||||
| 1/2" | 1" | 1/2" | 3" | |||||
| 1/2" | 1-1/4" | 1/2" | 3" | |||||
| 5/8" | 1-1/4" | 5/8" | 3-1/2" | 27123 | ||||
| 5/8" | 1-5/8" | 5/8" | 3-1/2" | |||||
| 3/4" | 1" | 3/4" | 4" | |||||
| 3/4" | 1-3/4" | 3/4" | 4" | |||||
| 1" | 1-1/4" | 1" | 4" | |||||
| 1" | 1-3/4" | 1" | 4" | |||||
5/8" 3833 AlumaMill G3, other ends & lengths
| EDP | End | Length | Flute length | Overall length | Radius | Coating | Open |
|---|---|---|---|---|---|---|---|
| 27622 | Ball | Standard | 1-1/4" | 3-1/2" | |||
| 27631 | Ball | Standard | 1-5/8" | 3-1/2" | |||
| 27609 | Corner Radius | Stub | 3/4" | 3-1/2" | 0.0150" | ||
| 27633 | Corner Radius | Extra-Long | 2-1/2" | 5" | 0.0300" | ||
| 27637 | Corner Radius | Extra-Long | 2-1/2" | 5" | 0.0900" | ||
| 27643 | Corner Radius | Extra-Long | 3-1/4" | 6" | 0.0300" | ||
| 27645 | Corner Radius | Extra-Long | 3-1/4" | 6" | 0.0600" | ||
| 27648 | Corner Radius | Extra-Long | 3-1/4" | 6" | 0.0900" | ||
| 27076 | Square | Stub | 3/4" | 3-1/2" |
5/8" in other End Mills
| EDP | Series | Length | Flute length | Overall length | Radius | Flutes | Coating | Open |
|---|---|---|---|---|---|---|---|---|
| 34421 | 3000 Intimidator | Standard | 1-1/4" | 3-1/2" | 0.0300" | 4 | ||
| 35241 | 3500 Fury | Standard | 1-1/4" | 3-1/2" | 0.0300" | 4 | ||
| 35607 | 3505 Fury Vicor | Standard | 1-1/4" | 3-1/2" | 0.0300" | 4 | ||
| 36433 | 3125 V-Mac | Standard | 1-1/4" | 3-1/2" | 0.1200" | 5 | ||
| 29121 | 3116 TiMill | Standard | 1-1/2" | 3-1/2" | 0.0300" | 6 | ||
| 31601 | 3200 4-Flute General Purpose | Stub | 1" | 3-1/2" | 0.0600" | 4 |
About EDP 27123
Fullerton EDP 27123 is the 3833 AlumaMill G3 5/8" Corner Radius End Mill: length Standard, flute length 1-1/4", shank diameter 5/8", overall length 3-1/2", radius 0.0600", cutting type Center, 3 flutes. Made in the USA by Fullerton Tool.
EDP 27123 questions
- What are the dimensions of Fullerton EDP 27123?
- EDP 27123 has a cutting diameter of 5/8" (0.6250" · 15.88 mm), flute length of 1-1/4" (1.2500" · 31.75 mm), shank diameter of 5/8" (0.6250" · 15.88 mm), overall length of 3-1/2" (3.5000" · 88.9 mm) and radius of 0.0600" (1.52 mm).
- What materials is EDP 27123 rated for?
- The 3833 AlumaMill G3 is rated for High Si Aluminum > 10% and Composites.
- Where can I check stock and price for EDP 27123?
- Live stock by warehouse, lead time and your account's price for EDP 27123 are in Fullerton's tool search at fullertontool.com/search. Signed-in customers can order from there.
- What materials is the 3833 AlumaMill G3 designed for?
- It's designed for Composites, High Si Aluminum > 10%, Low Si Aluminum < 10%, Plastics, and Wood.
- What coating does the 3833 AlumaMill G3 come with?
- It's stocked Uncoated and with FC5 coating. Our FC5 coating is a specialized coating that minimizes buildup at the edge for cleaner machining in aluminum and titanium alloys.
- What end styles are available for the 3833 AlumaMill G3?
- It's available in Ball, Corner Radius, Square.
- How many flutes does the 3833 AlumaMill G3 have?
- The 3833 AlumaMill G3 is a 3-flute tool.
- What's the helix angle on the 3833 AlumaMill G3?
- The 3833 AlumaMill G3 has a helix angle of 37.50°.
- What tolerances does the 3833 AlumaMill G3 hold?
- The 3833 AlumaMill G3 holds a shank tolerance of h6 and a cutter tolerance of +.0000"/-.0005" | +0.000mm/-0.013mm.
