Router
Description
Fullerton Tool's 3925 Series of routers features 3 Left Hand Spiral, Right Hand Cutting Flutes. The 3925 design performs well in Fiberglass and other Composites. The left hand spiral holds material down and forces chips down.
Features
- Square Corner
- 3 Flutes
- Left Hand Spiral
- Right Hand Cut
- Single End
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Shank Diameter Tolerance: h6
- Cutter Diameter Tolerance: +.000“ -.003”
Product Search
| Cutting Diameter | Flute Length | Shank Diameter | Overall Length | None |
|---|
| Material Type | Profile Finishing | Profile Roughing | Slotting | Plunge / Ramp | |
|---|---|---|---|---|---|
| Wood | Primary | Primary | Primary | Primary | Primary |
| Composites | Secondary | Secondary | Secondary | Secondary | Secondary |
| Plastics | Primary | Primary | Primary | Primary | Primary |
| High Si Aluminum > 10% | Applicable | Applicable | |||
| Low Si Aluminum < 10% | Applicable | Applicable | |||
| Brass & Copper | Applicable | Applicable | |||
| Graphite | |||||
| Cast Iron | Discouraged | Discouraged | Discouraged | Discouraged | Discouraged |
| Hardened Steels > 48 RC | Discouraged | Discouraged | Discouraged | Discouraged | Discouraged |
| Steels | Discouraged | Discouraged | Discouraged | Discouraged | Discouraged |
| Stainless Steels | Discouraged | Discouraged | Discouraged | Discouraged | Discouraged |
| Super Alloys (Nickel based, Inconel) | Discouraged | Discouraged | Discouraged | Discouraged | Discouraged |
| Titanium | Discouraged | Discouraged | Discouraged | Discouraged | Discouraged |
| General Purpose | Applicable | Applicable | Applicable | Applicable | Applicable |
