| | Series | Description |
|---|
 | 1410
| Solid Carbide Reamers, 24-Hour Decimal Size Reamers, Short Length, Straight Flute, 45 Deg. Cutting Chamfer |
|---|
 | 1410L
| Solid Carbide Reamers, 24-Hour Decimal Size Reamers, Short Length, LH Spiral, 45 Deg. Cutting Chamfer |
|---|
 | 1410R
| Solid Carbide Reamers, 24-Hour Decimal Size Reamers, Short Length, RH Sprial, 45 Deg. Cutting Chamfer |
|---|
 | 1450
| Solid Carbide Reamers, 24-Hour Decimal Size Reamers, Standard Length, Straight Flute, 45 Deg. Cutting Chamfer, Steel Shank |
|---|
 | 1450L
| Solid Carbide Reamers, 24-Hour Decimal Size Reamers, Standard Length, LH Spiral, 45 Deg. Cutting Chamfer, Steel Shank |
|---|
 | 1450R
| Solid Carbide Reamers, 24-Hour Decimal Size Reamers, Standard Length, RH Spiral, 45 Deg. Cutting Chamfer, Steel Shank |
|---|
 | 2002
| Solid Dura-Carb End Mills, 48-Hour Decimal Size End Mills, Standard Length, Single End, Square End, Center Cutting Two 30 Deg. RH Sprial RH Cut Flutes |
|---|
 | 2002B
| Solid Dura-Carb End Mills, 48-Hour Decimal Size End Mills, Standard Length, Single End, Ball End, Center Cutting Two 30 Deg. RH Sprial RH Cut Flutes |
|---|
| No Image Available | 2002C
| Solid Dura-Carb End Mills, 48-Hour Decimal Size End Mills, Standard Length, Single End, Corner Radius End, Center Cutting Two 30 Deg. RH Sprial RH Cut Flutes |
|---|
 | 2004
| Solid Dura-Carb End Mills, 48-Hour Decimal Size End Mills, Standard Length, Single End, Square End, Center Cutting Four 30 Deg. RH Sprial RH Cut Flutes |
|---|
 | 2004B
| Solid Dura-Carb End Mills, 48-Hour Decimal Size End Mills, Standard Length, Single End, Ball End, Center Cutting Four 30 Deg. RH Sprial RH Cut Flutes |
|---|
| No Image Available | 2004C
| Solid Dura-Carb End Mills, 48-Hour Decimal Size End Mills, Standard Length, Single End, Corner Radius End, Center Cutting Four 30 Deg. RH Sprial RH Cut Flutes |
|---|
 | 2450
| Soild Carbide Saws, 48-Hour Delivery on up to 12 Pieces. Diameter 1/4" to 6". See Catalog for Details |
|---|
| No Image Available | Corner Radius
| JIT Service, Add a Special Corner Radius To 12 or fewer Standard End Mills in 72-Hours |
|---|
| No Image Available | Weldon Flat
| JIT Service, Add a Weldon Flat to a standard End Mill in 48-Hours. |
|---|
