Hogger

Fullerton's solid carbide 3975 Series Sinusoidal Hogger is designed as a rougher for high volume material removal in Steels, Steel Alloys, Stainless Steels and Hardened Steels.

Series Features:

  • Corner Radius
  • Flute Count Varies by Diameter
  • 30° Helix
  • Sinusoidal Geometry (Corn Cob Cutters)
  • Form Relief
  • Coarse Pitch
  • Single End
  • Right Hand Spiral
  • Right Hand Cut
  • Center Cutting
  • Standard TiAlN Coating
  • Weldon Flat
  • Inch Based Tools
  • Dura Carb II (Advanced Micrograin)
  • Shank Diameter Tolerance: h6
  • Cutter Diameter Tolerance: +.000“ -.003” / +0.00 -0.07mm

Product Search


Cutting DiameterCutting Flute LengthShank DiameterOveral LengthFlutesRadiusTIALN

Material TypeProfile FinishingProfile RoughingSlottingPlunge / RampPocket
Wood
CompositesDiscouraged Discouraged Discouraged Discouraged Discouraged
PlasticsDiscouraged Discouraged Discouraged Discouraged Discouraged
High Si Aluminum > 10%Discouraged Applicable Applicable Applicable
Low Si Aluminum < 10%Discouraged Applicable Applicable Applicable
Brass & CopperDiscouraged Applicable Applicable Applicable
Graphite
Cast IronApplicable Applicable Applicable Applicable
Hardened Steels > 48 RC Applicable
Steels Applicable Applicable Applicable
Stainless SteelsDiscouraged Applicable Applicable Discouraged Applicable
Super Alloys (Nickel based, Inconel)Applicable Applicable Applicable Applicable Applicable
Titanium Applicable Applicable Applicable
General PurposeDiscouraged Primary Primary Applicable Primary