Attention! Pricing Adjustments Going Into Effect January 1st,2018. Click Here to Find Out More

AlumaMill G3 Vicor

Fullerton tool company 3805 series

Description

The 3805 AlumaMill G3 Vicor has an advanced flute shape and relief form to produce excellent surface finishes and reduced tool pressure. The added chip breakers* provide chip control while the unique wiper geometry produces excellent floor finishes. The sinuous end gash of the G3 is ideal for agressive plunging and ramping speeds. This tool is stocked with an FC5 coating. Special variations are available uncoated in 2 weeks.

*Any 3833 AlumaMill G3 with a diameter of .25? and over can be made into a 3805 AlumaMill G3 Vicor using our 48 hour chip breaker service.

Features

  • Advanced Performance
  • Radius End
  • 3 Flutes
  • 37.5° High Helix
  • Chip Breakers
  • Right Hand Spiral
  • Right Hand Cut
  • Standard FC-5 Coating
  • Inch Based Tools
  • Center Cutting
  • Dura Carb (Micrograin)
  • Shank Diameter: h6
  • Cutter Diameter Tolerance: +.0000“ -. 0005” / +0.000 -0.013mm

Product Search


Cutting DiameterCutting Flute LengthShank DiameterOverall LengthFC5

Material TypeProfile FinishingProfile RoughingSlottingPlunge / RampPocket
Wood
Composites
Plastics
High Si Aluminum > 10%
Low Si Aluminum < 10%
Brass & Copper
Graphite
Cast Iron
Hardened Steels > 48 RC
Steels
Stainless Steels
Super Alloys (Nickel based, Inconel)
Titanium
General Purpose

;